Link a Trainer to a dashboard account with the Trainer ID and verify ownership.
Before you begin
- Charge the Trainer.
- Create or sign in to a dashboard account.
- Keep the device nearby so you can restart it and read the display.
Pairing steps
1. Find the Trainer ID
Switch the Trainer on. During startup, read the 5–6 character Trainer ID at the top of the display. Copy its letters and numbers exactly.
2. Open device settings
Open dashboard device settings. If you are signed out, the dashboard preserves this destination through sign-in.
3. Enter the ID
Choose the Deep Throat Trainer pairing action, enter the ID without spaces, and submit it.
4. Verify
Success
The dashboard shows a success confirmation and the Trainer appears in your device list. Pairing does not configure Wi-Fi; complete Wi-Fi setup next.
Troubleshooting
| Problem | Action |
|---|---|
| ID disappeared before you copied it | switch off, switch on, and watch the boot screen |
| ID rejected | check case, letters versus numbers, and accidental spaces |
| device is already paired | ask the current owner to unpair it in dashboard device settings |
| original account or owner is unavailable | email support@researchanddesire.com with the Trainer ID and available purchase details |
| dashboard says paired but device is offline | use Wi-Fi setup; do not pair again |
Video walkthrough
Video transcript
The demonstration powers on a charged Trainer, reads the Trainer ID from the top of the boot screen, opens dashboard device settings, enters that ID, and submits the pairing form. The dashboard then confirms that the device is paired. Use the written steps above for the current dashboard route and transfer recovery.